RRP $2,599.00
$1,899.00
SAVE $700.00 (27%)
In Stock

More info.

Make 4 payments of $474.75 over 8 weeks and get it now!

Product Information

The Progear E-Cology is a 700c Shimano Nexus internal 7 speed Revo shift Alloy step through Electric City Bike with the Bafang MAX-01 Electric Drive System. E-Cology is a pedal assist bike using the acclaimed Bafang MAX-01 E-Bike system, coupled with the 36v/11.6 AH Phylion battery that has Panasonic cells and a matched Phylion charger which complies to all required standards. The Strong and lightweight Alloy Frame is a step through style ensuring a comfortable fit for all cyclists of all ages and is easier to dismount in heavy traffic.

Features
- The comfortable Kenda Kahn 700c tyres along with fenders and rear alloy rack ensure comfortable city and cycle path cycling.
- The SR-Suntour Pre-load adjustable suspension forks further add to your comfort.
- Power from the Bafang electric motor will assist your pedalling to get you there and back again.
- Reliable and low maintenance Tektro Alloy V brakes provide all the stopping power needed
- The alloy frame, rims and components make the Progear E-Cology a light weight e-bike but with the strength where needed.
- The motor is mid drive and in general a mid drive motor powers through the drivetrain (transmission) of the bike which enables the motor to help with long & steep climbs and power up to high speeds on flat roads.
- The lower centre of gravity also provides better handling, easier to lift on and off a bike rack and removal of either wheel is easier.
- The Mid Drive Bafang motor is 26v/250w and limited to 25km/h ensuring Australian Standards compliance.

Travel distance on our Electric Bikes:
The travel distance after a full charge on this e-Bike can vary from 30km to 50km.
There are several factors that will affect how long the battery will last after a full charge.

  • Factors include:
  • - Level of pedal assistance – higher level of assistance will use more battery charge
  • - Weight of Rider & Luggage – more weight may require more power from the battery
  • - Terrain & Weather Conditions – Terrain & wind may cause drag, and will require more power to maintain speed.
  • - Tyre Conditions – Incorrect tyre pressure may create more rolling resistance
  • - Traffic/Route Conditions – Stop/Start cycling may use more power to accelerate up to appropriate travelling speeds.

Technical Specifications

Frame Alloy X6 700C × 460mm HT:?50*?44*150mm Width:130mm RC:506mm
Handlebars Zoom Alloy W:610mm 33°?25.4
Right Shifter Shimano Nexus Revo Shifter SL-C3000-7
Suspension Fork SR-Suntour NEX-HLO-P, Front Suspension Pre-Load Adjustable Coil, 700C 28.6 x 25.4 x 170mm
Rear Derailleur Shimano Altus RD-M370-SGS 9-SP Index
Rear Inner 7sp Hub Shimano Nexus 7-Speed Internal Hub,SG-C3000-7R, 36H, For Roller Brake, 130 x 182MM, Black
Brakes Tektro Forged Alloy V brakes L:110mm
Brake Lever Tektro Alloy V Brake Levers
Mudguard PVC Mudguards, Front & Rear
Front Hub Joytech Alloy Quick Release 13G × 36H M9 × 100 × 108mm x 115mm
Rear Hub Quando Alloy One Piece Forged with Disc Brake Mount and Quick Release. 13G × 36H M10 × 135 × 145mm 9 SP
Kick Stand Alloy with Plastic end cap
Pedal VP Trecking/Urban Pedals. Alloy Body, PP Cage, Cro-Mo Axle, 9/16?
Grip Velo Kraton L?135mm Kraton black/Gel grey VLP-35 plug EN71-3 CPSIA
Saddle Velo Comfort Double Density, Chromoly Rails, ArcTech Zone Cut Out
Chain Wheel & Crank-set Bafang 1/8" x 38T Chainwheel, Alloy 170mm Cranks
Chain KMC 1/2? × 1/8? × 108L 7-Sp
Wheels Alloy Rims, Steel QRF Hubs, 26 x 2.125 Tyres
Tyre Kenda Kahn K-935, 700C × 35C 30TPI A/V
Rim Alloy Matte Black with CNC sidewalls, 700C × 1.5" × 13G × 36H A/V
Seat Post Alloy X6 700C × 460mm HT:?50*?44*150mm Width:130mm RC:506mm
Head Set Steel BED?25.4 ×?44 ×?30mm H=20.7 10Pcs.
Stem Kalloy Alloy Adjustable stem ?25.4×180mm E=90mm ?25.4 -10?50°
Rack Alloy Rear Rack H=367mm L=230mm
Freewheel Shimano ASMGEAR18LP
Carton Size 146 x 23 x 94 (L x W x H, cm)
Gross Weight 28kg
Warranty Lifetime warranty on frame and fork & 12 month warranty on electrical components
Bell Nuvo Allo & Plastic Bell

Electrical Components

Motor Bafang MAX-01 Drive System. 36V/250W, Limit 25km/h, CL:49mm, With controller, With battery communication, AU. Complies to EN 15194:2009+A1, Annex C. EN 14766:2005. EN14764:2005
Display Bafang LCD Display, DC 36V, 0-5 Modes, UART communication, With Walk Boost and light switch
Battery Phylion 36V/11.6Ah, Panasonic 2900mAh cell, With Intelligent protection board,With communication, AU. Tested to UN recommendations on the transport of dangerous goods, manual of tests and criteria. Part 111, sub-section 38.3, Rev. 5
Speed Sensor Bafang Sensor, 1 Pulse, 5V, 500mm
Charger Information Bafang Sensor, 1 Pulse, 5V, 500mm
Cable 600mm

(EBIKECOLOGY2)

SKU EBIKECOLOGY2
Barcode # 9347166045584
Brand Progear
Shipping Weight 79.0000kg
Shipping Width 23.000m
Shipping Height 94.000m
Shipping Length 146.000m

Here at Progear, we want you to be out there riding your bike with a smile on your face and without any issues. So that you can purchase with confidence, we offer the original purchaser:              

• Lifetime Warranty on all frames            

• Lifetime Warranty on all forks

• Manufacturer’s warranty on all non-consumable components                            

This warranty applies only to the original owner of a Progear bicycle and is not transferable to subsequent owners. Consumable parts (including grips, tubes, tyres, cables, brake pads and saddle covering) are not covered by the warranty. The warranty does not cover paint damage, rust, corrosion, any modification made to the bicycle, normal wear and tear, improper assembly or maintenance, installation of parts or accessories not originally intended or compatible with the bicycle as sold and costs of installation, assembly and disassembly. The warranty does not apply to damage or failure due to accident, abuse, misuse, neglect or theft. Costs such as assembly, transport etc. are not covered by the warranty.                  

Some exclusion's do apply see individual user manuals for full warranty information.                         

How a claim is made

When making a claim, you will need to provide proof of purchase, condition photos of the item. This information is required to be submitted via the contact us page and communication is made through that. When the claim is created, the customer support team should reply within 48 hours.

Be The First To Review This Product!

Help other HR-Sports users shop smarter by writing reviews for products you have purchased.

Write a product review